Straight Talk

The Truck Is Not Too Big. The Parking Spot Is Too Small.

A standard parking space has not grown since the sixties. The half-ton has gained two feet. One of them is wrong.

Park a current half-ton crew cab in a city garage and you will hear about it. The truck hangs past the line. The mirrors fold or they get clipped. The person in the compact beside you gives the look. The look says the truck is too big.

The truck is not too big. The truck is the size of the work. The stall is the size of a decision somebody made during the Johnson administration, and the two have not been introduced since.

The numbers

A typical striped parking space in Texas is about 9 feet wide and 18 feet long. Some older garages run 8 and a half by 18. Those dimensions were set when a full-size car was a sedan around 17 feet long and 6 and a half feet wide.

A current half-ton crew cab with a short bed is about 19 to 20 feet long and 6 feet 8 inches wide at the body, closer to 8 feet with the mirrors out. That is a foot and a half longer than the stall and, with mirrors, as wide as the whole thing. It is not possible to park this truck correctly in that space, because the space was not drawn for it.

Why the truck is the right size

A half-ton in Texas is not a fashion choice for most of the people driving one. It hauls feed, it hauls a trailer, it carries four people and a week of work in the same trip. The crew cab exists because the regular cab could not do the family and the job at the same time, and people got tired of owning two vehicles to do one life.

The cab-to-bed ratio is a compromise everybody with a truck has already made. Shorter bed than they want so the thing fits in the garage at home. Longer than a car so the thing is still a truck. That is as small as the truck can get and still be the tool.

Why the stall is the wrong size

Parking stalls are sized by code and by the economics of a garage. Every six inches of width across a hundred stalls is a lost stall. So the width stays at 9 feet, or shrinks to 8 and a half, and the lines stay where they were painted.

Meanwhile the vehicle fleet moved. Trucks and SUVs are now most of what is sold in this state. The garage is designed for the minority of vehicles on the road and complains about the majority. If a restaurant built chairs for the average customer in 1965 and then got annoyed at the people sitting in them, you would not say the customers were the problem.

What to actually do

None of this changes the fact that the truck does not fit, and the person in the compact did not design the garage. So:

Park at the end of a row where there is overhang room, or back in against a wall so the long end is the hood and it sticks out over nothing. Take the far stalls. They are empty, nobody dings you, and the walk is a hundred feet.

Fold the mirrors. Every current truck has a button for it. Pull in straight, which means a wider swing on the way in and a slower approach than you want. Take two tries if the first one is crooked. One slow correction is better than a door in the lane.

If the garage says “compact only,” believe it. A row of compacts is a row of stalls that are 7 and a half feet wide, and the truck is not getting out of there with its paint.

Who should move

The garage, slowly. New construction is already striping wider stalls in a lot of places because the people paying for the garage drive trucks. The old ones will get restriped when the concrete gets redone, and not before.

Until then, the truck is going to hang over the line, and that is fine. The truck is doing what the truck is for. The line is doing what it was told in 1968.

The short version

Nine by eighteen was drawn for a sedan that is gone. The crew cab is twenty feet because it does two jobs. Park at the ends, back in, fold the mirrors, never take two. And when somebody tells you the truck is too big, you can say it once, calmly, and get on with your day: the truck fits Texas. The stall does not.

While you're here